Polaris T-Slot Mounting Installation Guide
For all Polaris models that have the T-slot style interface.
Tools
-
7/16" wrench - Box wrench or socket
-
Ratchet and extension (if using a socket)
SnowMountz Placement
-
Determine the proper placement of your SnowMountz holder.
-
There are 3 sets of holes to space each mount in or outboard as needed.
-
The mount can also be rotated 180° for additional mounting options.
Mounting Hardware
-
Install (2) carriage bolts into the T-slot.
Install SnowMountz
-
Place your SnowMountz carrier over the carriage bolts
-
Install washer
-
Install locknut finger tight
Tighten Mounting Hardware
-
Using either the box end wrench or ratchet wrench tighten nut until snug
-
NOTE: Since TPU is flexible and can compress it is possible to overtighten. Washer should NOT be visually deforming the carrier base.
Go Ride!
-
Check the fit to make sure that your skis or snowboard are not interfering with seat or any other components that could cause wear.
-
Secure with the Titan Utility strap
-
Go Ride!
